828Glazed Tile Roof Plate 900 Trapezoid Two Profiles On One Machine Production Line
1, Main Component of the production line:
1). Decoiler---------------------------------------------1unit
2). Feeding guide-------------------------------------1unit
3). Main roll forming system------------------------1 unit
4). Hydraulic station-----------------------------------1 unit
5). Hydraulic cutting service-------------------------1 unit
6). PLC computer control-----------------------------1 unit
7). Safety cover------------------------------------------2 unit
2, Glazed Tile Roof Plate And Trapezoid Two Profiles Production Line :
1) Number of forming steps: 18Steps /15 steps .
2) Material of shaft: 45# steel hardening and tempering treatment. Outer diameter 75mm ,total solid Tolled shafts .
3) Rollers: Material is high grade No.45 forged steel, with digital-controlled procession. The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool. So that to ensure long life of forming rollers.
4) Main motor power: 5.5 KW with cyclical planetary gear speed reducer.
5) The plating chromium’s thickness on the surface of rollers: 0.05mm.
6) Main stand: 350# H steel welded structure Wall plate thickness: 16mm the main frame of machine is welded separately and the outside wall is connected by screw after being rot blasted on the surface.
7) Chain and gear move the line, motor drives. All working actions are controlled by PLC electric cabinet automatically.
8) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer’s requirement).
9) Line working speed (Forming speed): about 0-15 m/min (without cut time).
10) Main machine motor power: about 5.5 KW (Depend on final design).
Dimension of the machine: 9000mmx1400mmx1300mm
3, Hydraulic Ue-coiler
Un-power: manual de-coiler; Max. Capacity: 5T
Suit for coil inner diameter: 508mm, suitable coil Max. out diameter: 1000mm
Manual power expands the coil inner surface.
4, Hydraulic Cutting
1) Adopts post cutting, Stop to cut
2) The cutting blade material is Cr12 with quenched treatment.
3) Adopts welded frame for good rigidity.
4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.
5) The power of cutting is provided by hydraulic station.
5, Machine Photo for reference:
Product Tags:
|
|
380 V Glazed Tile Roll Forming Machine , Trapezoidal Sheet Roll Forming Machine Images
|
